Strategic U.S. Gallium & Scandium Red-Mud Collaboration
Released
Released
Announcement PDF
Australia: Perth,Western Australia
USA: Houston, Texas
Metallium Ltd
ASX: MTM | OTCQX: MTMCF
ENGAGE WITH THIS ANNOUNCEMENT ON INVESTORHUB: HERE
ASX Announcement 12 December 2025
Metallium Secures Strategic Role in Program to Establish Domestic
Gallium & Scandium Supply from Red Mud in Louisiana, USA
KEY HIGHLIGHTS:
▪ Metallium, through its 100%-owned subsidiary Flash Metals USA Inc., has executed a binding Letter of Intent
(LoI) with ElementUSA to collaborate on the recovery of gallium & scandium from red mud in the United States.
▪ Metallium’s Flash Joule Heating (FJH) technology will support ElementUSA’s work to develop a demonstration
facility in Gramercy, Louisiana to recover gallium, scandium and other critical metals from red mud (RM)1
.
▪ ElementUSA is a leading specialist in metal recovery from primary and secondary resources and operates the
Critical Resource Accelerator in Texas, a premier R&D hub with world-class metallurgical expertise.
▪ Long-term processing potential: 30Mt red-mud feedstock located at the nationally significant Gramercy alumina
refinery in Louisiana, the only operating of its kind in the U.S. and a designated critical infrastructure site2
.
▪ Metallium allocated up to U$10.1M in non-dilutive funding for the installation, commissioning and operation of
FJH units across Phase A (pilot) and Phase B (scale up at Gramercy), subject to performance milestones.
▪ Any future commercial plants will be covered by separate agreements and will generate additional licence fees,
royalties and revenue share for Metallium.
▪ Long term commercial structure established covering technology licence fees per commercial plant, throughput
based per tonne royalties and revenue share on sales of recovered gallium, scandium and associated metals.
▪ This agreement marks Metallium’s evolution into a revenue generating, technology-led critical metals processor
with significant scale up potential across urban mining and mineral processing.
Metallium Limited (“Metallium” or the “Company”) (ASX: MTM; OTCQX: MTMCF) advises that its United States
subsidiary Flash Metals USA Inc. has executed a binding LOI with ElementUSA Inc that includes up to U$10.1 million in
non-dilutive funding for initial deployment of Flash Joule Heating technology, and a commercial framework covering
licence fees, royalties and revenue share. The collaboration will support ElementUSA’s initiative to develop a
demonstration facility in Gramercy, Louisiana to separate and purify gallium and scandium from industrial waste,
including red mud (RM).
Metallium Managing Director & CEO Mr Walshe said: “This is a significant milestone for Metallium and a strong
endorsement of our FJH technology within a major industry–supported effort to expand domestic critical-minerals capability.
Gallium and scandium are critical for defence, semiconductors and advanced materials, yet domestic Western supply
remains limited.
“Our partnership with ElementUSA positions Metallium at the centre of the U.S. effort to build sovereign capability in these
metals. The commercial terms create long term value through technology licence fees, per tonne royalties and revenue
share, while securing access to highly strategic sites with deep water port access. This programme is exactly the type of
high-impact deployment we have been targeting and provides a scalable pathway to commercialise our technology across
multiple strategic feedstocks. It also delivers immediate diversification for Metallium by establishing commercial
opportunities in both urban mining and mineral processing, creating a unique competitive moat around our business. The
broader U.S. effort to strengthen domestic processing capability for critical materials aligns closely with Metallium’s
technology positioning.”
1
https://www.elementusaminerals.com
2
https://www.elementusaminerals.com/howwedoit Metallium has not independently verified the quantum of feedstock available for processing.
Up to U$10M in non-dilutive funding supporting ElementUSA’s red-mud processing programme using FJH technology
2
ASX: MTM | OTCQX: MTMCF
ElementUSA is a United States critical minerals company focused on recovering
gallium, scandium and other strategic materials from industrial waste streams. Through its Critical Resource Accelerator in
Cedar Park, Texas, ElementUSA conducts advanced process development, flowsheet modelling and scale up of mineral
liberation and separation technologies. The company works across mechanical, thermal, chemical and hydrometallurgical
processes to unlock value from complex feedstocks. To learn more, visit: https://www.elementusaminerals.com.
Figure 1: ElementUSA Chief Strategy Officer Chris Young at Red Mud tailings area. Source: ElementUSA
COMMERCIAL FRAMEWORK
The LOI agreed with ElementUSA establishes a robust and scalable, milestone-driven, long term commercialisation pathway
for Metallium’s FJH technology for red mud (RM) recycling. Metallium has been allocated up to U$10.1 million for the initial
deployment of Flash Joule Heating units across two stages and subject to milestones. Phase A covers installation and
baseline demonstration and operation of the first units in Texas. Phase B covers relocation and scale-up in Gramercy.
Progression between stages will be detailed in the forthcoming Development Agreement.
1. Programme Funding to Metallium
Metallium has been allocated up to U$10.1 million from ElementUSA across two initial deployment stages:
• Phase A: Installation and operation of the first FJH units at Metallium’s Anahuac, Texas facility to validate
performance on RM and establish baseline demonstration.
• Phase B: Relocation and expansion to Gramercy, Louisiana for larger scale operation.
These funds apply only to the above scope. Any plants built after this will be subject to new agreements and terms. Under
the LOI, funding for Phase A and Phase B will be confirmed upon execution of the Definitive Agreements. Indicative budgets
are approximately U$3.7M for Phase A and U$6.4M for Phase B, with progression between phases subject to performance
milestones and site readiness. The LOI includes an initial U$50,000 Project Initiation Fee, which is linked to achievement of
Phase A milestones.
2. Technology Licence Fees
For every future commercial plant constructed beyond the initial stages, ElementUSA and/or its affiliates will pay Metallium
a licence fee. Future commercial plants constructed beyond the initial deployment will include a technology licence fee
payable to Metallium. Based on the LOI, such fees are expected to fall within a typical commercial range for advanced
metallurgical process technologies, generally in the order of low-to-mid six figures per plant per annum.
3
ASX: MTM | OTCQX: MTMCF
3. Throughput Based Processing Fees
Metallium will receive a processing fee on every tonne of RM processed using its FJH technology. The processing fee is
structured on a volume-dependent per-tonne basis and is expected to fall within a typical commercial range of USD 15–40
per tonne, depending on annual throughput.
The Gramercy red mud feedstock exceeds 30 million tonnes3
. Under the LOI, there is no minimum quota of feedstock that
must be provided for processing. However, ElementUSA’s allocation of funding across the two initial deployment stages is
based on Metallium presenting a long-term processing solution for Element USA at the Gramercy site.
4. Revenue Share on Metal Sales
Metallium will receive a percentage of revenue generated from the sale of gallium, scandium and other recovered metals
produced using its technology. The revenue share is a low single-digit percentage, typically between 2% and 3% of gross
metal sales, scaling with plant volume. Investors are cautioned that the RM Feedstock has not been disclosed as a mineral
resource estimate, and so the Company makes no representations to investors that there is any gallium, scandium or other
commercial metals present in the feedstock.
The fee, royalty and revenue‑share ranges are indicative only, based on typical commercial terms for advanced metallurgical
technologies, and will be finalised in the Definitive Agreements. They should not be construed as guidance.
Figure 2: Illustrative operating model
Programme Structure
The Letter of Intent provides the framework for completing a detailed Development Agreement and Licensing Agreement
between Metallium and ElementUSA. These Definitive Agreements will formalise the scope of work, performance milestones
and conditions for progressing through the Lab Phase, Phase A and Phase B work programmes. Progression between
stages will be confirmed jointly as part of the Definitive Agreements, consistent with standard staged technology deployment
practices.
The LOI confirms that Metallium retains full ownership of FJH intellectual property, including any enhancements or derivative
works developed through the collaboration, while ElementUSA retains ownership of its separation and refining technologies.
The LOI also contemplates evaluating supplemental work programmes that may include recovery of additional materials
such as aluminium, titanium and sodium, and assessing potential residual products suitable for sale as clinker
substitutes. These items would be considered under separate scope discussions.
The LOI includes a short exclusivity period to finalise the Definitive Agreements and allows both parties to continue
advancing preparatory work for the initial installation and testing. The LOI is non-binding except for confidentiality, governing
law, dispute resolution, termination, and the Project Initiation Fee. No obligation exists to proceed beyond initial testing
unless Definitive Agreements are signed. The LOI may be terminated by either party on written notice, and if the Definitive
Agreements are not executed within the LOI term, neither party is obliged to proceed.
3
https://www.elementusaminerals.com/howwedoit NOTE: Metallium has not independently verified the quantum of feedstock available for processing.
4
ASX: MTM | OTCQX: MTMCF
NEXT STEPS
• Metallium and ElementUSA will now advance detailed documentation and preparatory work for initial installation
and testing. Further updates will be provided as appropriate.
• Under the LOI, Metallium and ElementUSA intend to negotiate and execute a Development Agreement and
Licensing Agreement within the LOI term, which runs for 180 days unless extended by mutual agreement.
• Progression from the Lab Phase to Phase A and Phase B will be subject to mutually agreed technical performance
milestones and completion of the Definitive Agreements.
This announcement has been authorised for release by the Board of Directors.
For further information, please contact:
Michael Walshe
Managing Director & CEO
Metallium Ltd
info@MetalliumInc.com | +61 8 6391 0112
Andrew Keys
Investor Relations
Keys Thomas Associates
Andrew.keys@keysthomas.com | +61 400 400 380
5
ASX: MTM | OTCQX: MTMCF
ABOUT METALLIUM LIMITED
Metallium Ltd (ABN 27 645 885 463), is pioneering a low-carbon, high-efficiency approach to recovering critical and precious metals
from mineral concentrates and high-grade waste streams. The company’s patented Flash Joule Heating (FJH) technology enables the
extraction of high-value materials, including gallium, germanium, antimony, rare earth elements, and gold, from feedstocks such as
refinery scrap, e-waste, and monazite.
Aligned with U.S. strategic supply chain objectives, Metallium has recently secured its first commercial site in Texas via its wholly owned
subsidiary, Flash Metals USA Inc., marking a major step toward near-term production and revenue generation.
To learn more, visit:
Website: metalliuminc.com
Contact: info@metalliuminc.com | +61 8 6391 0112
Investor Hub: investorhub.metalliuminc.com
𝕏 x.com/Metallium_MTM
www.linkedin.com/company/metalliumltd
USA Office: 12 Greenway Plaza, Suite 1100, Houston, Texas USA 77046
Australia Office: Unit 4, 22 Railway Road, Subiaco, Western Australia 6008
CAUTIONARY STATEMENT REGARDING VALUES & FORWARD-LOOKING INFORMATION
The figures, valuations, forecasts, estimates, opinions and projections contained herein involve elements of subjective judgment and analysis and
assumption. Metallium does not accept any liability in relation to any such matters, or to inform the Recipient of any matter arising or coming to the
company’s notice after the date of this document which may affect any matter referred to herein. Any opinions expressed in this material are subject to
change without notice, including as a result of using different assumptions and criteria. This document may contain forward-looking statements. Forward-
looking statements are often, but not always, identified by the use of words such as “seek”, “anticipate”, “believe”, “plan”, “expect”, and “intend” and
statements than an event or result “may”, “will”, “should”, “could”, or “might” occur or be achieved and other similar expressions. Forward-looking
information is subject to business, legal and economic risks and uncertainties and other factors that could cause actual results to differ materially from
those contained in forward-looking statements. Such factors include, among other things, risks relating to property interests, the global economic climate,
commodity prices, sovereign and legal risks, and environmental risks. Forward-looking statements are based upon estimates and opinions at the date the
statements are made. Metallium undertakes no obligation to update these forward-looking statements for events or circumstances that occur subsequent
to such dates or to update or keep current any of the information contained herein. The Recipient should not place undue reliance upon forward-looking
statements. Any estimates or projections as to events that may occur in the future (including projections of revenue, expense, net income and performance)
are based upon the best judgment of Metallium from information available as of the date of this document. There is no guarantee that any of these
estimates or projections will be achieved. Actual results will vary from the projections and such variations may be material. Nothing contained herein is,
or shall be relied upon as, a promise or representation as to the past or future. Metallium, its affiliates, directors, employees and/or agents expressly
disclaim any and all liability relating or resulting from the use of all or any part of this document or any of the information contained herein.
Share your feedback
Discover