Encouraging beneficiation results for REE clays E Laverton
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
ASX: MTM
1 December 2023
Encouraging beneficiation results for rare earth element
(REE) clays at Point Kidman prospect, East Laverton.
Highlights:
Initial beneficiation test work results on Point Kidman clay-hosted rare earth element (REE)
mineralisation are very encouraging.
By selectively removing coarse (large) particles from the clay samples, significant potential benefits
have been identified:
o
Increased Total REE (TREE) and higher-value Magnet REE (MREE) grades; and
o
Average of 76% TREE recovered in samples less than 106 µm size fraction.
Significant grade improvement from beneficiation (discarding of the +20 µm size fraction):
o
Increase in head grade from 3,071 ppm TREE to 7,120 ppm TREE (sample 04591)
o
Average TREE grade increase across all samples ~100%.
Results indicate that a majority of REEs can be recovered in fine fractions, suggesting that simple
beneficiation may allow for a substantial reduction in waste processing and reduced reagent
consumption in a future process plant design.
Successful initial leach test results show up to 76% TREE recovery (using 100 g/L HCl).
Preliminary metallurgical recoveries compare favourably to other known clay-hosted REE deposits
in Western Australia.
MTM Critical Metals Limited (ASX:MTM) (MTM or the Company) has received the results of
preliminary metallurgical test work on four composite drilling samples collected from the Point Kidman
REE prospect, at its East Laverton Project in Western Australia.
Basic metallurgical tests including analysis of different size fractions and leach tests were completed
to evaluate recovery of REEs from widespread clay-hosted mineralisation identified by previous
aircore drilling.
MTM Managing Director, Mr Lachlan Reynolds, said that the Company was encouraged by the
substantial uplift in head grade and rejection of low-grade material that can be achieved by
simple particle size separation.
“Preliminary metallurgical test work on the clay-hosted rare earths at Point Kidman, including
beneficiation and leaching, shows that there are significant opportunities to potentially optimise the
future processing of the clay-hosted mineralisation. This is a major step forward in proving the
economic viability of a rare earth deposit at East Laverton.
“We are very pleased to see that simple beneficiation can achieve up to 100% uplift in rare earth
grades, including the valuable magnet rare earth elements such as neodymium and praseodymium.
@MTM Critical
@MTM Critical Metals
“Further test work is required, particularly with respect to the leaching of the mineralisation but as our
exploration is defining a substantial district scale development of shallow rare earth element
mineralisation these results are important for our strategy of resource discovery and delineation.”
Figure 1: Location map of prospects at the East Laverton Project.
Figure 2: Gridded image of Total REE surface geochemistry results showing the location of MTM drill
holes and samples selected for preliminary metallurgical test work.
2
Metallurgical Test Work
Four composite drilling samples were collected from the Point Kidman REE prospect (Appendix II),
from each of the previously drilled areas (see Figure 2 and Appendix I). These samples were sent to
Independent Metallurgical Operations Pty Ltd for the preliminary metallurgical test work program.
Size Fraction Analysis
Sizing analysis work has demonstrated that the REE mineralised material is highly amenable to
upstream beneficiation as the majority of the REEs are apparently hosted in the ultrafine -20 µm (less
than 20 micron) size fraction. REE grade can potentially be significantly increased, and waste material
removed, by adopting simple mineral beneficiation techniques during processing.
For the sizing analysis, a 500g split was prepared from each of the metallurgical sample composites
and was screened at 106, 75, 53, 38 and 20 µm particle size. The distribution of REE throughout the
size fractions of each sample is summarised in Figure 3, indicating that a large portion of the REE
report to the -20 µm size fraction.
Cumulative passing grades and distributions are summarised in Appendix IV. Overall sizing results
indicate that the -20 µm fraction contains more than half of the TREE for all samples except 03699,
where the majority of REE was retained in the coarser +106 µm fraction.
Figure 3: Total REE distribution in different size fractions for all composite samples.
Screening of the samples at a particle size of +106 µm allow for the following:
Mass recoveries to the fine fraction (-106 µm) ranging from 22.0% to 62.5%, averaging 45.6%;
TREE recoveries to the fine fraction ranging from 29.4% to 95.1%, averaging 76.1%;
Excluding the results from sample 03699, mass recovery averaged 53.4% and TREE recovery
averaged 85.6%.
3
Results indicate minimal difference in the distribution between the HREE and LREE throughout the
samples.
Analysis of the different fraction sizes show that removal of coarse size particles substantial increases
in TREE grades, with the average grade generally increasing in progressively finer particle sizes
(Appendix IV).
An average of ~100% upgrade from the TREE head grade assay and ~75% upgrade from the MREE
head grade assay (Appendix III) was achieved in the finest -20 µm fraction (Table 1). The best result
achieved was a 132% increase in TREE (sample 04591), where the grade increased from a head
grade of 3,071 ppm to 7,120 ppm TREE, albeit with a reduced TREE recovery of 52.9% TREE.
Table 1: TREE recovery, grade uplift and mass removed using ‘ultrafine’ -20 µm size fraction.
Comp Sample
03391
Comp Sample
03699
Comp Sample
03829
Comp Sample
04591
TREE recovery (%)
85.3
14.1
69.6
52.9
TREE grade uplift (%)1
110
51
102
132
MREE grade uplift (%)1
98
31
103
74
Mass removed (%)2
58.5
91.8
65.1
76.1
-20 µm fraction
1 compared to head grade assay
2 compared to head sample
Leaching Analysis
Preliminary metallurgical leaching tests have also been received for the samples of REE-enriched
clays from the Pt Kidman prospect. Four leach tests were conducted on each of the composite
samples, as summarised in Table 2 and shown in Appendix VI.
Table 2: Summary of leach test regimes
Test
Purpose
Reagents
(Lixiviant)
Reagents
(Acid)
pH
Temp.
(oC)
Time
(h)
1
Leach any REE Ionically
Exchangeable phase present
1.0M (NH4)2SO4
+ 1.0M NaCl
H2SO4 to maintain
pH at ~4
4
25
(ambient)
6
2
Test if increased temp. and lower
pH improve recoveries of the REE
Ion Exchange phase
1.0M (NH4)2SO4
+ 1.0M NaCl
H2SO4 to maintain
pH at ~1
1
50
6
3
Test if REEs within the Colloid
phase (insoluble oxides or
hydroxides) are leachable
1.0M NaCl
25g/t HCl
<1
50
6
4
Test if REE’s within the Mineral
phase (insoluble oxides or
hydroxides) are leachable.
1.0M NaCl
100g/t HCl
~0
50
6
Test results show that significant recovery of REE from the clay can be achieved by leaching in
hydrochloric acid (HCl). Recoveries of the REE’s using a 100 g/l HCl leach showed average TREE
recoveries of up to 76.1%. Leach recoveries for each sample over the four test regimes are shown
4
below (Figure 4 and Table 2) and summarised in Appendix VI. Elemental recoveries are shown in
Figure 5.
Figure 4: Leach test average TREE Recoveries for all composite samples.
Table 2: Average REE leaching recoveries for each sample, for a range of leaching regimes.
Composite Sample 03391
Composite Sample 03699
Leach Solution
Amm.
Sulphate
pH 4
Amm.
Sulphate
pH 1
HCl
25g/L
HCl
100g/L
Amm.
Sulphate
pH 4
Amm.
Sulphate
pH 1
HCl
25g/L
HCl
100g/L
TREE (AVE)
0.06%
1.28%
38.14%
50.25%
0.19%
1.62%
39.17%
62.17%
Composite Sample 03829
Composite Sample 04591
Leach Solution
Amm.
Sulphate
pH 4
Amm.
Sulphate
pH 1
HCl
25g/L
HCl
100g/L
Amm.
Sulphate
pH 4
Amm.
Sulphate
pH 1
HCl
25g/L
HCl
100g/L
TREE (AVE)
0.08%
1.85%
55.15%
76.45%
0.07%
0.91%
27.61%
67.23%
Work has shown that the majority of mineralisation is not associated with ionic clays as evidenced by
the low recoveries achieved by the first two test utilising ammonium sulphate. The REE’s are instead
likely contained within colloidal (ultrafine) REE particles, oxidised rare earth carbonate or rare earth
oxide minerals. Recovery of these REE’s can be achieved via acid leaching, requiring higher acid
concentrations. These results are comparable with the majority of known REE clays projects in
Western Australia.
5
Composite 03391
Composite 03699
Composite 03829
Composite 04591
Figure 5: Summary of elemental REE recoveries for each composite sample, for the different leaching
regimes.
Further Work
Only a small part of the extensive Pt Kidman prospect area has been tested with drilling and more
than 200 km2 area has critical metal prospectivity based on the recent geochemical soil sampling
completed by the Company.
The next phase of target generation is currently underway, ahead of a further campaign of drilling
where the Company’s focus will be on identifying further contiguous zones of higher-grade REE
mineralisation that could form the basis of a substantial resource.
Further metallurgical test work will also be undertaken to characterise the recovery of the REEs from
within the identified mineralised areas and determine if there are zones that have potential for both
beneficiation and for higher recoveries. The reported test results are non-optimised and there remains
significant potential for improvement in recovery and acid consumption.
This announcement has been authorised for release by the Board of Directors.
For further information, please contact:
Lachlan Reynolds
Managing Director
MTM Critical Metals Limited
Phone: +61 (0)8 6391 0112
Email: lachlan.reynolds@mtmmetals.com.au
Gareth Quinn
Investor Relations
Republic PR
Mobile: 0417 711 108
Email: gareth@republicpr.com.au
6
About MTM Critical Metals Limited
MTM Critical Metals Limited is an exploration company which is focused on searching for rare earth elements (REE), gold,
lithium, nickel, and base metals in the Goldfields and Ravensthorpe districts of Western Australia and in the Abitibi region of
the Province of Québec. The Company holds over 3,500km2 of tenements in three prolific and highly prospective mineral
regions in Western Australia and has an option to acquire, through an earn-in arrangement, a 100% interest in 2,400 ha of
exploration rights in Québec, Canada. The East Laverton Projects is made up of a regionally extensive package of
underexplored tenements prospective for REE, gold and base metals. The Mt Monger Gold Project comprises an area
containing known gold deposits and occurrences in the Mt Monger area, located ~70km SE of Kalgoorlie and immediately
adjacent to the Randalls gold mill operated by Silver Lake Resources Limited. The Ravensthorpe Project contains a package
of tenements in the southern part of Western Australia between Esperance and Bremer Bay which are prospective for a
range of minerals including REE, lithium, nickel and graphite. The Pomme Project in Québec is a known carbonatite
intrusion that is enriched in REE and niobium and is considered to be an extremely prospective exploration target adjacent to
a world class REE resource (Montviel deposit). Priority drilling targets have been identified in all project areas and the
Company is well funded to undertake effective exploration programs. The Company has an experienced Board and
management team which is focused on discovery to increase value for Shareholders.
Competent Person’s Statement
The information in this announcement that relates to Exploration Results is based on and fairly represents information
compiled by Mr Lachlan Reynolds. Mr Reynolds is the Managing Director of MTM Critical Metals Limited and is a member of
both the Australasian Institute of Mining and Metallurgy and the Australasian Institute of Geoscientists. Mr Reynolds has
sufficient experience of relevance to the styles of mineralisation and types of deposits under consideration, and to the
activities undertaken, to qualify as a Competent Person as defined in the 2012 Edition of the Joint Ore Reserves Committee
(JORC) Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Reynolds
consents to the inclusion in this announcement of the matters based on information in the form and context in which they
appear.
Previous Disclosure
The information in this announcement is based on the following MTM Critical Metals Limited (formerly Mt Monger Resources
Limited) ASX announcements, which are all available from the MTM Critical Metals Limited website
www.mtmcriticalmetals.com.au and the ASX website www.asx.com.au.
15 May 2023, Drilling confirms further rare earth element mineralisation and increased potential at East Laverton
21 June 2023, Metallurgical test work initiated on REE-enriched clays at East Laverton
11 October 2023, East Laverton Project soil survey defines extensive new rare earth and nickel targets
The Company confirms that it is not aware of any new information or data that materially affects the information included in
the original ASX announcements and that all material assumptions and technical parameters underpinning the relevant ASX
announcements continue to apply and have not materially changed. The Company confirms that the form and context in
which the Competent Person’s findings are represented have not been materially modified from the original ASX
announcements.
Cautionary Statement Regarding Values & Forward-Looking Information
The figures, valuations, forecasts, estimates, opinions and projections contained herein involve elements of subjective
judgment and analysis and assumption. MTM Critical Metals does not accept any liability in relation to any such matters, or to
inform the Recipient of any matter arising or coming to the company’s notice after the date of this document which may affect
any matter referred to herein. Any opinions expressed in this material are subject to change without notice, including as a
result of using different assumptions and criteria. This document may contain forward-looking statements. Forward-looking
statements are often, but not always, identified by the use of words such as “seek”, “anticipate”, “believe”, “plan”, “expect”,
and “intend” and statements than an event or result “may”, “will”, “should”, “could”, or “might” occur or be achieved and other
similar expressions. Forward-looking information is subject to business, legal and economic risks and uncertainties and other
factors that could cause actual results to differ materially from those contained in forward-looking statements. Such factors
include, among other things, risks relating to property interests, the global economic climate, commodity prices, sovereign
and legal risks, and environmental risks. Forward-looking statements are based upon estimates and opinions at the date the
statements are made. MTM Critical Metals undertakes no obligation to update these forward-looking statements for events or
circumstances that occur subsequent to such dates or to update or keep current any of the information contained herein. The
Recipient should not place undue reliance upon forward-looking statements. Any estimates or projections as to events that
may occur in the future (including projections of revenue, expense, net income and performance) are based upon the best
judgment of MTM Critical Metals from information available as of the date of this document. There is no guarantee that any of
these estimates or projections will be achieved. Actual results will vary from the projections and such variations may be
material. Nothing contained herein is, or shall be relied upon as, a promise or representation as to the past or future. MTM
Critical Metals, its affiliates, directors, employees and/or agents expressly disclaim any and all liability relating or resulting
from the use of all or any part of this document or any of the information contained herein.
7
APPENDIX I – Drill Hole Details Summary
Hole ID
Type
North
MGA
East
MGA
RL
(m)
Depth
(m)
Dip
( o)
Azimuth
( o)
23ELAC012
AC
6860657
456062
518
45
-90
000
23ELAC059
AC
6861300
452446
518
36
-90
000
23ELAC068
AC
6855808
452506
508
52
-90
000
23ELAC141
AC
6859583
462214
516
27
-90
000
APPENDIX II – Metallurgical Sample Details Summary
Hole ID
Composite
Sample ID
Depth
(m)
Average Grade
LREE ppm
HREE ppm
TREE ppm
MREE ppm
23ELAC012
Comp 03391
24 – 28
863
39
901
165
23ELAC059
Comp 03699
20 – 24
1,309
49
1,358
332
23ELAC068
Comp 03829
28 – 32
499
63
562
125
23ELAC141
Comp 04591
20 – 24
3,225
116
3,341
646
APPENDIX III – Composite Sample Head Assay Results Summary
Element
Units
Comp 03391
Comp 03699
Comp 03829
Comp 04591
Dy
ppm
6
8
9
15
Er
ppm
3
3
4
7
Ho
ppm
1
1
2
2
Lu
ppm
0
0
1
1
Tb
ppm
1
2
2
3
Tm
ppm
0
1
1
2
Y
ppm
26
34
37
69
Yb
ppm
2
3
3
5
Ce
ppm
388
639
236
1,450
Eu
ppm
3
4
4
9
Gd
ppm
9
14
13
29
La
ppm
277
293
130
854
Nd
ppm
120
224
94
437
Pr
ppm
41
72
26
142
Sm
ppm
15
29
17
49
Total HREE
ppm
40
52
57
102
Total LREE
ppm
853
1,275
520
2,969
Total Rare Earth Elements
ppm
893
1,327
578
3,071
Total MREE
ppm
168
306
131
597
Heavy Rare
Earth
Elements
(HREE)
Light Rare
Earth
Elements
(LREE)
HREE (Heavy Rare Earth Element) grade includes Dy, Er, Ho, Lu, Tb, Tm, Y and Yb.
LREE (Light Rare Earth Element) grade includes Ce, Eu, Gd, La, Nd, Pr and Sm.
TREE (Total Rare Earth Element) grade includes all the elements above.
MREE (Magnet Rare Earth Element) grade includes Dy, Tb, Nd, and Pr.
8
APPENDIX IV – Size Fraction Analysis Results Summary
Composite 03391 Cumulative Passing Grade & Distribution
Size
Fraction
Mass
µm
Dist %
Grade ppm
Dist %
Grade ppm
Dist %
Grade ppm
Dist %
-106
62.5
55
92.0
1,331
95.3
1,387
95.1
-75
57.4
58
89.2
1,428
93.9
1,486
93.7
-53
52.1
59
81.6
1,543
92.0
1,602
91.6
-38
47.1
56
70.7
1,663
89.7
1,719
88.9
-20
41.5
55
60.7
1,818
86.4
1,873
85.3
HREE
LREE
TREE
Composite 03699 Cumulative Passing Grade & Distribution
Size
Fraction
Mass
µm
Dist %
Grade ppm
Dist %
Grade ppm
Dist %
Grade ppm
Dist %
-106
22.0
77
33.6
1,670
29.3
1,747
29.4
-75
17.6
84
29.3
1,774
24.8
1,858
25.0
-53
14.0
89
24.9
1,879
21.0
1,968
21.1
-38
11.5
83
18.8
1,932
17.6
2,014
17.7
-20
9.2
72
13.1
1,937
14.1
2,009
14.1
HREE
LREE
TREE
Composite 03829 Cumulative Passing Grade & Distribution
Size
Fraction
Mass
µm
Dist %
Grade ppm
Dist %
Grade ppm
Dist %
Grade ppm
Dist %
-106
56.2
93
84.8
820
88.3
913
88.0
-75
49.1
101
80.3
895
84.2
996
83.8
-53
43.0
107
74.4
970
80.0
1,077
79.4
-38
38.8
108
67.7
1,021
75.8
1,129
75.0
-20
34.9
105
59.3
1,061
70.9
1,166
69.6
HREE
LREE
TREE
Composite 04591 Cumulative Passing Grade & Distribution
Size
Fraction
Mass
µm
Dist %
Grade ppm
Dist %
Grade ppm
Dist %
Grade ppm
Dist %
-106
41.5
186
74.3
5,531
73.7
5,717
73.7
-75
36.2
200
69.8
5,945
69.1
6,145
69.1
-53
31.5
207
62.7
6,347
64.2
6,554
64.1
-38
27.7
193
51.6
6,653
59.2
6,846
58.9
-20
23.9
175
40.2
6,945
53.4
7,120
52.9
HREE
LREE
TREE
9
APPENDIX V – Rare Earth Element Assay Results from Size-by-Assay Analysis
Size by Assay Analysis of Sample 03391
Size Fraction
µm
+106
-106+75
-75+53
-53+38
-38+20
-20
Total
Head Assay
Mass
%
37.5
5.1
5.3
5.0
5.6
41.5
100.0
Ba
ppm
813.6
2143.5
2014.3
1826.8
1632.3
956.3
1100.5
1085.7
Ce
ppm
49.4
108.5
144.4
187.1
235.9
817.7
393.4
388.2
Cr
ppm
10
22
10
10
10
10
11
10
Cs
ppm
1.5
4.8
4.8
5.1
3.7
4.5
3.4
3.4
Dy
ppm
1
2.4
5.5
8.6
7.4
8.1
5.0
6
Er
ppm
0.6
1.6
4.2
6.2
4.7
3.4
2.5
2.7
Eu
ppm
0.3
0.9
1.3
1.7
1.8
4.5
2.3
2.6
Ga
ppm
6.2
20.3
22.6
25.2
27
39.1
23.5
25.3
Gd
ppm
1.4
3.3
5.4
7.8
8.4
15.8
8.4
8.8
Hf
ppm
1.9
8
33.2
53.7
34.9
6.6
10.3
11.7
Ho
ppm
0.05
0.4
1.3
1.9
1.3
1.6
0.9
1
La
ppm
32.7
71.1
87.3
110.7
147.5
629
295.2
276.5
Lu
ppm
0.05
0.2
0.7
1.1
0.9
0.4
0.3
0.4
Nb
ppm
7.1
22.5
25.2
30.4
38
21.3
17.6
17.9
Nd
ppm
17.3
36.5
47.5
63.6
84.5
238.7
117.8
120.1
Assays
Pr
ppm
6.2
12.3
15.5
20.5
27.7
83.2
40.9
41.4
Rb
ppm
91.8
264.4
259.8
241.4
215.6
153.7
149.6
166.7
Sm
ppm
2.5
5.1
7.1
10.7
12.6
29.1
14.9
15.4
Sn
ppm
1
2
3
4
5
6
4
4
Sr
ppm
84.5
192.3
172.9
156.8
145.3
236.5
164.7
176.5
Ta
ppm
0.9
3
3.7
3.3
6.2
2.5
2.2
2.6
Tb
ppm
0.2
0.6
1
1.1
1.2
1.9
1.07
1.2
Th
ppm
9.3
21.6
39.5
52.6
54.1
77.9
44.6
44.7
Tm
ppm
0.05
0.3
0.7
1
0.6
0.5
0.4
0.4
U
ppm
1.3
3.9
6.6
9.4
8.1
7.9
5.2
5.3
V
ppm
26
41
26
34
31
32
30
27
W
ppm
0.5
2
0.5
0.5
1
3
2
1
Y
ppm
5.5
13.8
35.3
55.4
44.6
36.1
24.9
25.9
Yb
ppm
0.6
1.4
4.4
8.1
6.1
3
2.5
2.3
Zr
ppm
108
278
1420
2464
1585
248
444
503
Total HREE
ppm
8
21
53
83
67
55
38
40
Total LREE
ppm
110
238
309
402
518
1,818
873
853
Total TREE
ppm
118
258
362
486
585
1,873
910
893
Ga
ppm
13.9
17.3
16.8
18.6
20
26.1
15.5
15.6
Gd
ppm
13.2
14.3
15.6
20.7
23.3
21.6
14.5
13.9
Hf
ppm
6.1
5.5
13.3
43.1
38.4
8.6
8.3
9.8
Ho
ppm
1
1.3
1.5
2.8
2.8
1.7
1.2
1.2
La
ppm
268.7
306.4
332.4
397.9
471.1
476.3
299.6
293.3
Lu
ppm
0.3
0.3
0.5
1.4
1.3
0.5
0.4
0.3
Nb
ppm
13.8
15.8
17.9
22.8
28
15.9
14.8
15.7
Nd
ppm
197.3
216.4
233
281.5
329.9
322.9
216.1
223.9
Assays
Pr
ppm
63.3
69.5
74.8
88.9
102
105.4
69.4
71.8
Rb
ppm
185.3
187
169.8
164
159.3
151.9
180.6
194.8
Sm
ppm
25.9
28.2
30.8
39.1
42.9
43.2
28.5
28.6
Sn
ppm
2
2
3
4
4
9
3
2
Sr
ppm
88.3
105.6
109
114.9
118.2
87.3
91.1
91.7
Ta
ppm
0.7
0.8
1.1
1.6
1.6
1.3
0.8
1.3
Tb
ppm
1.2
1.7
2.1
2.7
3
2.5
1.45
2.2
Th
ppm
29.1
32.1
36.1
45.8
53.4
56.5
33.0
32.8
Tm
ppm
0.4
0.3
0.6
1.3
0.9
0.6
0.5
0.5
U
ppm
6.4
6.9
8.3
13.7
14.5
11.8
7.4
7.1
V
ppm
15
27
22
25
40
44
19
31
W
ppm
0.5
1
0.5
0.5
0.5
3
1
0.5
Y
ppm
29.3
32.3
42.3
81.2
86.2
48.2
34.3
34.2
Yb
ppm
1.7
2.6
3.4
8.6
8
3.2
2.3
2.5
Zr
ppm
288
234
552
1861
1639
330
371
409
Total HREE
ppm
43
49
64
119
125
72
51
52
Total LREE
ppm
1,140
1,255
1,359
1,644
1,912
1,937
1,256
1,275
Total TREE
ppm
1,183
1,304
1,422
1,764
2,036
2,009
1,307
1,327
Ga
ppm
4.6
13.9
17.4
20.1
23.6
41.8
20.4
20.4
Gd
ppm
3.9
7.5
10.7
12.7
17.9
25.9
13.2
13.2
Hf
ppm
1.7
2.8
10.4
18.1
24.1
4.7
4.9
4.8
Ho
ppm
0.5
1.1
1.6
2.4
3.6
3.0
1.7
1.5
La
ppm
35.3
77.5
92.4
128.9
169.5
277.2
135.4
129.8
Lu
ppm
0.3
0.4
0.8
1.2
1.8
0.8
0.6
0.5
Nb
ppm
2.7
11.4
16.6
22.4
27.9
6.0
7.1
7.2
Nd
ppm
25.9
57.5
69.1
94.3
122.0
189.9
94.6
93.8
Assays
Pr
ppm
7.7
17.2
19.4
27.3
35.2
54.9
27.5
26.4
Rb
ppm
96.8
103.5
97.8
92.7
92.0
72.7
88.6
93.7
Sm
ppm
4.8
10.7
12.3
15.8
24.1
33.3
16.8
16.9
Sn
ppm
1
3
2
6
10
4
3
3
Sr
ppm
35.9
56.5
55.3
52.6
53.6
29.5
37.7
41.6
Ta
ppm
0.5
1.5
2.5
3.5
4.1
0.6
1.0
0.9
Tb
ppm
0.4
1.2
1.4
2.0
2.9
3.9
1.90
1.8
Th
ppm
6.3
10.6
13.9
18.4
24.2
32.1
17.3
17
Tm
ppm
0.5
0.5
0.6
1.3
1.5
1.1
0.8
0.7
U
ppm
1.9
4.9
6.5
9.3
11.9
10.5
6.1
5.9
V
ppm
17
50
71
73
100
126
66
64
W
ppm
0.5
2
1
2
2
3
2
2
Y
ppm
13.9
25.2
38.2
62.3
85.3
66.2
39.3
36.8
Yb
ppm
1.7
2.0
4.8
8.8
11.6
5.2
3.8
3.1
Zr
ppm
54
118
347
668
930
130
163
165
Total HREE
ppm
21
39
60
97
134
105
62
57
Total LREE
ppm
139
304
364
506
666
1,061
522
520
Total TREE
ppm
160
343
424
604
800
1,166
584
578
Ga
ppm
14.7
27.1
30.5
31.6
34
38.8
23.2
23.7
Gd
ppm
14
26.5
34.8
49.1
54.6
58.9
29.3
29
Hf
ppm
4.1
9
33.6
86.4
78.8
10.7
13.3
13.4
Ho
ppm
1.1
2.1
3.6
7
7.3
4.2
2.5
2.2
La
ppm
400.1
811.3
958.7
1203.7
1408.6
2123.5
929.4
853.8
Lu
ppm
0.4
0.6
1.4
3.1
3.2
0.7
0.7
0.6
Nb
ppm
6.9
23.1
26.3
32.6
33.9
20.6
13.9
13.9
Nd
ppm
210.8
410.1
476.5
609.1
701.0
954.3
445.5
437.2
Assays
Pr
ppm
70.8
134.2
155.8
199.5
230.5
320.7
148.9
142
Rb
ppm
186.8
335.2
351.1
274.6
226.7
145.3
197.3
206.3
Sm
ppm
24.5
50.3
59
80
89.3
109.2
52.3
49
Sn
ppm
2
4
5
5
5
6
3
3
Sr
ppm
230.3
276.9
257.7
269.5
268.2
387.7
274.7
290.2
Ta
ppm
0.1
1.7
1.6
2.5
2.3
1.4
0.7
1.1
Tb
ppm
1.6
3.2
4.4
6.7
7
6.1
3.29
2.7
Th
ppm
31.4
60.7
78.9
113.2
127.2
182.1
78.0
74.9
Tm
ppm
0.3
0.7
1.3
3.1
2.9
1.2
0.8
1.6
U
ppm
4.6
10.4
14.6
23.9
25.6
18.8
10.3
9.9
V
ppm
29
80
75
65
65
70
46
39
W
ppm
0.5
2
1
2
3
9
3
3
Y
ppm
30.3
61.3
108.5
211
215.7
122.1
71.4
68.5
Yb
ppm
2.3
3.3
8.5
21.8
20.8
5.7
4.9
4.7
Zr
ppm
199
426
1635
4356
3900
522
653
689
Total HREE
ppm
46
89
157
307
312
175
104
102
Total LREE
ppm
1,401
2,722
3,247
4,104
4,798
6,945
3,116
2,969
Total TREE
ppm
1,447
2,811
3,404
4,411
5,110
7,120
3,220
3,071
Size by Assay Analysis of Sample 03699
Size Fraction
µm
+106
-106+75
-75+53
-53+38
-38+20
-20
Total
Head Assay
Mass
%
78.0
4.4
3.5
2.6
2.3
9.2
100.0
Ba
ppm
1246.1
1272.4
1182.4
1140.9
1107.4
692.9
1188.5
1119.9
Ce
ppm
567.3
616.2
668.0
809.8
935.8
960.9
623.8
639.1
Cr
ppm
10
10
10
10
22
30
12
10
Cs
ppm
1.3
1.3
1.3
1.4
1.4
2.5
1.4
1.4
Dy
ppm
6.7
7.2
8.9
13.9
14.7
10.6
7.5
7.9
Er
ppm
2.4
3.1
4.3
7.5
8
4.8
3.0
3.3
Eu
ppm
3.8
4.2
4.2
6.3
6.5
6.3
4.2
4.1
Size by Assay Analysis of Sample 03829
Size Fraction
µm
+106
-106+75
-75+53
-53+38
-38+20
-20
Total
Head Assay
Mass
%
43.8
7.1
6.1
4.3
3.9
34.9
100.0
Ba
ppm
702.0
1177.4
1080.6
915.2
747.7
182.5
588.5
592.1
Ce
ppm
60.0
131.0
156.8
223.1
291.4
471.6
230.5
236.3
Cr
ppm
30
75
93
116
139
204
106
113
Cs
ppm
0.9
1.8
1.9
1.6
1.2
1.9
1.4
1.4
Dy
ppm
2.6
5.9
8.3
12.1
17.3
17.6
9.4
8.6
Er
ppm
1.5
2.7
4.7
7.2
9.9
7.1
4.3
4.3
Eu
ppm
1.4
2.8
2.9
4.3
5.5
7.8
4.1
3.8
Size by Assay Analysis of Sample 04591
Size Fraction
µm
+106
-106+75
-75+53
-53+38
-38+20
-20
Total
Head Assay
Mass
%
58.5
5.3
4.7
3.8
3.8
23.9
100.0
Ba
ppm
3918.1
4735.2
4165.3
3944
3593.7
2617.3
3650.5
3546.6
Ce
ppm
676.4
1281.9
1552.1
1948.6
2299.3
3360.7
1501.9
1449.8
Cr
ppm
10
24
27
34
31
21
16
22
Cs
ppm
1.5
5
6.2
4
3
2.5
2.3
2.2
Dy
ppm
6.9
12.4
19.8
33.8
35.4
25
14.2
14.6
Er
ppm
2.7
4.9
9.3
20.1
19.6
9.5
6.1
6.6
Eu
ppm
4.3
8
9.8
14
14.8
18
8.8
8.5
10
APPENDIX VI – Leach Test Work Flowsheet
11
APPENDIX VII – Leach Test Results Summary
Composite 03391 Average REE Leach Recovery Results
Test 1
Test 2
Test 3
Test 4
(NH4)2SO4 pH 4
(NH4)2SO4 pH 1
HCl 25 g/L
HCl 100 g/L
Average HREE Recovery (%)
0.03
1.13
34.6
45.0
Average LREE Recovery (%)
0.09
1.44
42.1
56.2
Average TREE Recovery (%)
0.06
1.28
38.1
50.2
Leach Test #
Composite 03699 Average REE Leach Recovery Results
Leach Test #
Test 1
Test 2
Test 3
Test 4
(NH4)2SO4 pH 4
(NH4)2SO4 pH 1
HCl 25 g/L
HCl 100 g/L
Average HREE Recovery (%)
0.18
2.24
34.8
54.4
Average LREE Recovery (%)
0.20
0.91
45.3
72.2
Average TREE Recovery (%)
0.19
1.62
39.7
62.7
Composite 03829 Average REE Leach Recovery Results
Test 1
Test 2
Test 3
Test 4
(NH4)2SO4 pH 4
(NH4)2SO4 pH 1
HCl 25 g/L
HCl 100 g/L
Average HREE Recovery (%)
0.08
2.21
46.4
62.0
Average LREE Recovery (%)
0.08
1.44
65.1
92.9
Average TREE Recovery (%)
0.08
1.85
55.1
76.4
Leach Test #
Composite 04591 Average REE Leach Recovery Results
Leach Test #
Test 1
Test 2
Test 3
Test 4
(NH4)2SO4 pH 4
(NH4)2SO4 pH 1
HCl 25 g/L
HCl 100 g/L
Average HREE Recovery (%)
0.11
1.10
24.0
57.2
Average LREE Recovery (%)
0.04
0.69
31.7
78.7
Average TREE Recovery (%)
0.07
0.91
27.6
67.2
12
APPENDIX VIII - JORC Compliance Tables
Section 1 Sampling Techniques and Data
Criteria
JORC Code Explanation
Commentary
Sampling techniques
Nature and quality of sampling (eg cut channels, random chips, or
specific specialised industry standard measurement tools appropriate to
the minerals under investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc). These examples should not be taken as
limiting the broad meaning of sampling.
Conventional Aircore (AC) drilling was used to obtain representative 1 metre
samples of approximately 1.5kg using a rig-mounted cyclone and cone splitter.
Include reference to measures taken to ensure sample representivity and
the appropriate calibration of any measurement tools or systems used.
1 metre drilling samples were screened with a handheld XRF instrument to
identify samples for assaying.
Aspects of the determination of mineralisation that are Material to the
Public Report.
In the laboratory, samples are riffle split if required, then pulverised to a nominal
85% passing 75 microns to obtain a homogenous sub-sample for assay.
In cases where ‘industry standard’ work has been done this would be
relatively simple (eg ‘reverse circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation may be required, such as where
there is coarse gold that has inherent sampling problems. Unusual
commodities or mineralisation types (eg submarine nodules) may warrant
disclosure of detailed information.
Sampling was carried out under MTM's standard protocols and QAQC
procedures and is considered standard industry practice.
Drill type (eg core, reverse circulation, open-hole hammer, rotary air
blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or
standard tube, depth of diamond tails, face-sampling bit or other type,
whether core is oriented and if so, by what method, etc).
Aircore drilling was completed using standard industry methods.
Method of recording and assessing core and chip sample recoveries and
results assessed.
AC drill samples recoveries were assessed visually but not recorded. Samples
are not considered to be materially biased, given the nature of the geology and
sampling method.
Drilling techniques
Drill sample recovery
Measures taken to maximise sample recovery and ensure representative
nature of the samples.
Whether a relationship exists between sample recovery and grade and
whether sample bias may have occurred due to preferential loss/gain of
fine/coarse material.
The remaining material from each metre was collected from the cyclone as a
bulk sample of approxi
Share your feedback
Discover